|
|
SUMP PUMP BACKUPEQUIPMENT |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| 1. AC Power Cord | ||||
| 2. Wall Mounting Bracket | ||||
| 3. Jumper Cords | ||||
| 4. Battery Cables with Battery Clamps and Plug-In Connector | ||||
| 5. Dual Staggered Sump Pump Stand |
|
|
![]() |
|
|
|||
|
Power Cord and Wall Mounting Bracket |
Jumper Cord and Battery Cables |
Dual Staggered Sump Pump Stand |
ADDITIONAL EQUIPMENT (Sold Separately)
The
DRYTROL®II
sump pump backup system allows you the flexibility to
choose your own AC sump pumps and batteries. You are not
locked into one specific brand, and may select the equipment (within our
specified ratings) that best suits
your needs . We can supply any or all
additional equipment items listed below along with your
DRYTROL®II
sump pump backup. We recommend and supply only high quality
additional equipment for basement flooding prevention.
DRYTROL®II
sump pump battery backup requires one or two 115 volt AC sump pumps with
a maximum rating up to 1/3hp, 8 amps, 920 watts, two 12 volt DC deep
cycle maintenance free lead acid batteries with a minimum rating of 90
amp/hours, and two plastic battery boxes.
A separate vertical float switch is recommended. This optional
switch will detect maximum water level and protect from basement
flooding.
Also available is an optional stand to hold the DRYTROL®II sump pump backup unit and the two sump pump backup batteries.
| 1. AC Sump Pump(s) | ||||
| 2. Deep Cycle Maintenance Free Lead Acid Batteries | ||||
| 3. Plastic Battery Boxes | ||||
| 4. Vertical Float Switch | ||||
| 5. DRYTROL®II Sump Pump Backup Control and Battery Stand |
|
|
|
|
|
|
AC Sump Pump |
Battery and Battery Box |
Vertical Float Switch |
Sump Pump Backup Control and Battery Stand |
ELECTRO-MATIC PRODUCTS CO.
2235 North Knox Ave.,
Chicago, Illinois USA 60639
Phone: (773) 235-4010 • Fax: (773) 235-7317
WWW.EM-CHICAGO.COM
Copyright © April 2009